Home / Services / Loading supervision

From empty box to sealed door

Once the doors close and the seal goes on, nobody sees inside until the container is opened at the other end. We're there while it's loaded, and we photograph and write down everything you'll want to be able to show later.

On the day

What we watch, in order

  1. The scale

    Before any bag is weighed, the scale is photographed and checked so the weights that follow can be trusted.

  2. The empty container

    Inside and out: clean, dry and free of odors, no holes or light leaks, the floor, walls and roof sound, the doors, gaskets and locking bars in order. Liners or dry bags fitted if your instructions call for them.

  3. The container number

    Photographed on the doors and checked against its ISO 6346 check digit on the spot, so a misread number is caught before it reaches the documents. The CSC safety plate is photographed too.

  4. The loading

    The bags going in: their condition, their marks against your instructions and the count. Bags check-weighed as they go, against the limit you set.

  5. Loaded, closed, sealed

    The full container before the doors close, the doors closed, and the seal with its number readable. The seal number goes on the record and on the seal photo itself.

The shot list

The same photos for every container

Each job has a shot list. The ones marked required have to be there before a container can be signed off without a question; our supervisor's screen shows what's still missing.

  • Scalerequired
  • Empty container (inside)required
  • Container numberrequired
  • CSC plate
  • Loading
  • Bags & marks
  • Loaded (before closing)required
  • Doors closedrequired
  • Sealrequired
  • Documents

The default list. Yours can add, drop or rename shots and choose which are required.

Every photo is stamped with the container, the shot, the time it was taken, who took it and where; seal photos also carry the seal number. Example.

Free tool

Check a container number

A container number is four letters and seven digits, and the last digit is a check digit worked out from the other ten (ISO 6346). One misread letter and the check fails. We run this on every container we supervise; you can use it here.

The check only proves the number is well formed, not that the container exists. Owner codes are registered with the Bureau International des Containers.

Type the number as it is on the doors. Spaces and dashes don't matter.

What you get

One row per container

As the supervisor works, each container's row fills in: details, what's been photographed, what's still missing, check weights and the checklist. Plus a photo folder per container, sorted by shot.

Container #Check digitSeal #BagsStatusMissing shotsWeightsChecklist
MSKU1234565OK0012345320Finishednone10 weighed · avg 69.4 kg · flagged: 08/8 answered · no problems
CSQU3054383OK0012346320LoadingDoors closed, Seal6 weighed · avg 69.2 kg · flagged: 18/8 answered · NO: small hole in roof

Example rows. Also recorded per container: booking / BL, lots and marks loaded, gross weight, truck or chassis, start and finish times, notes, and a link to its photos.

The checklist

Questions asked of every container

  • Container clean, dry and free of odors?
  • No holes, light leaks or damage to walls, roof and floor?
  • Doors, gaskets and locking bars in good order?
  • Liner / dry bags fitted as instructed?
  • Bags sound and dry when loaded?
  • Marks on the bags match the instructions?
  • Bag count matches the instructions?
  • Seal number matches the documents?

Each answered Yes, No or N/A. A No asks what's wrong, and is flagged on the container's row. Your job can use its own questions.

Loading coming up?

Tell us where and when, how many containers, and what your instructions say about marks, counts, weights and liners.